HP Pavilion not charging at the port? DC jack replacement in Hyderabad

An intermittent or loose DC jack on the HP Pavilion is rarely the jack alone — the solder joint to the board usually fails. We inspect the board mount, reflow or replace as required, and verify stable charging across the full wattage draw before the repair is signed off.

Request a consultation +91 97057 77417

Book your repair

An engineer confirms the slot within the hour.

Part specifications

Verified compatibility details for this component.

Part typeDC power jack or charging port assembly
Repair methodSolder-joint reflow or full jack replacement as required
TestCharge verified across full wattage range post-repair
ConditionNew OEM-grade connector
Warranty30-day workmanship warranty

What we service — and what requires further assessment

A clear scope helps set the right expectations before the engineer visits.

Covered in this service

  • Barrel DC jack replacement
  • USB-C charging port on supported models
  • Solder-joint reflow on the board mount
  • Power button boards

Requires separate assessment

  • DC jacks where the motherboard power circuit has shorted — board-level assessment first
  • Machines with physical damage to the charge port area from drops

How the service works

Four steps — diagnostic, quote, repair, handover.

  1. Request a callback

    Call or WhatsApp +91 97057 77417. Describe the symptom briefly — we identify the likely cause before the engineer arrives.

  2. Engineer assessment on-site

    An engineer reaches your Banjara Hills, Jubilee Hills, HiTec City, or Gachibowli address. Full diagnostic carried out; a written quote provided before any component is touched.

  3. Part sourced and fitted

    Common parts are carried on the van. Specialist components are ordered same-day and fitted on a follow-up visit or at the workshop — you choose.

  4. Quality check and handover

    Before the machine is returned, we verify the repair under load: charging circuit, display at full brightness, keyboard response, or storage read/write — depending on the job.

Engineer coverage — premium Hyderabad neighborhoods

On-site visits to Banjara Hills, Jubilee Hills, HiTec City, Gachibowli, Madhapur, Somajiguda, Begumpet, Secunderabad, and Kondapur.

Banjara Hills 500034 Jubilee Hills 500033 HiTec City 500081 Gachibowli 500032 Madhapur 500081 Film Nagar 500033 Somajiguda 500082 Begumpet 500016 Secunderabad 500003 Kondapur 500084
HP service center Banjara Hills HP service center Jubilee Hills HP service center HiTec City HP service center Gachibowli

Other commonly requested HP components and repair categories.

HP Pavilion 15-ck069tx DC jack HP Pavilion x360 DC power jack HP Pavilion G6-2000 DC jack HP M6 power button board HP Pavilion 13 x360 power button board HP brand hub — all models HP laptop service center Hyderabad

Frequently asked questions

The most common cause is a fractured solder joint between the DC jack and the motherboard. Movement of the connector over time cracks the joint. The fix is solder-reflow or full jack replacement at board level.
In most cases, yes — the jack is a through-hole component that can be desoldered and replaced. On ultra-thin models where it's integrated into a sub-board, the sub-board is replaced instead.
A straightforward reflow or jack swap takes 45–90 minutes. The engineer can carry common parts; specialist sub-boards are ordered and the job completed within one to two business days.
Repeated sideways pressure on the cable — lifting the laptop by the cable, plugging in at an angle — fatigues the solder joint. On older barrels, the pin sleeve wears and no longer makes reliable contact.

Ready to get your HP laptop serviced?

A written quote before any work begins. 30-day workmanship warranty on every repair. Engineer dispatch to Banjara Hills, Jubilee Hills, HiTec City, and Gachibowli.

Request a consultation